Cardinal Health Catalyst Negative Pressure Wound Therapy Canister with Gel Occlusion Detection

What to buy with Catalyst NPWT Canister

• Cardinal Health CATALYST Negative Pressure Wound Therapy Device
• Cardinal Health Negative Pressure Wound Therapy Y-Connector
• Argentum Silverlon Antimicrobial Negative Pressure Dressing

Inserting the NPWT Canister

• To insert the canister, line up the two ports on the canister with the two ports on the CATALYST. Press the canister up and into the CATALYST until it clicks and locks into place
• Gently line up the blue Twist N’ Connect end of the tubing to the blue Twist N’ Connect port on the canister, push down and twist clockwise to lock into place
• Verify the dressing application is correct, the tubing is connected and the tubing clamp is open
• Begin negative pressure wound therapy

Removing the NPWT Canister

• Close the tubing clamp
• Press the OFF Button on the CATALYST
• Grasp the blue Twist N’ Connect end of the tubing attached to the canister. Gently twist counterclockwiseand pull up to remove tubing from canister
• Press Canister Release Button and gently pull the bottom of canister down to remove from the CATALYST
• Cap the canister. Dispose of canister according to facility protocols as well as local, state and federal regulations

Customer Reviews