ConvaTec DuoDERM Extra Thin Dressing

ConvaTec DuoDERM Extra Thin Dressing

Brand/Manufacturer: CONVATEC
  • FSA Approved
  • Latex Free
  • Made in USA

Convatec DuoDERM Extra Thin Hydrocolloid Wound Dressing is a thin, flexible, conformable, and moisture-resistant wound dressing. It covers and protects susceptible areas anywhere on the body to gently protect newly formed tissue or skin at risk of breakdown. DuoDERM combines a unique hydrocolloid formulation and a vapor-permeable outer film to provide an occlusive moist environment. Translucent backing is designed to prevent needless dressing changes that can cause discomfort and disturb healing.

Why choose DuoDERM Hydrocolloid Dressing?

  • Moisture-resistant dressing
  • Protects the skin at risk
  • Supports wound repair
  • Used as a primary or secondary dressing
  • Can be cut to shape
  • Latex-free


Special Offer On Wound Care Supply

Item # Desc Pkg Price
187932 1-3/4" x 1-1/2", Spots Each
187932 1-3/4" x 1-1/2", Spots 20/Pack
187900 2" x 4", Rectangle Each
187900 2" x 4", Rectangle 20/Pack
187961 2" x 8", Rectangle Each
187961 2" x 8", Rectangle 10/Pack
187901 3" x 3", Square Each
187901 3" x 3", Square 20/Pack
187955 4" x 4", Square Each
187955 4" x 4", Square 10/Pack
187902 4" x 6", Oval 10/Pack
187957 6" x 6", Square Each
187957 6" x 6", Square 10/Pack
187903 6" x 7", Triangle 10/Pack

Features of ConvaTec Extra Thin Dressing

  • Provides a moist wound environment that supports healing
  • Improves healing rate and increases epithelialization
  • Designed to be used anywhere on the body to support and protect the newly-formed tissue
  • The moisture-resistant property provides ease of cleaning or showering.
  • Contains both a viral/bacterial barrier and a Triple Hydrocolloid Matrix.
  • It can be used as a primary dressing for treating and managing lightly exuding wounds.
  • It can be used as a secondary dressing for securing an Aquacel Dressing or an Aquacel Ag Dressing.
  • Translucent backing also helps initial monitoring of the wound and dressing placement.
  • Allows for easy removal without damaging the new epithelium.
  • Long wear time means fewer dressing changes are required.
  • Minimizes the risk of infections.
  • Easy to use.


When to use DuoDERM Thin Hydrocolloid Dressing?

DuoDERM Extra Thin Hydrocolloid Dressing is designed for the treatment of the following conditions:

  • The skin is at risk of further breakdown.
  • Dry to lightly exuding dermal ulcers or wounds.
  • Newly-formed tissue.
  • Stage I and II pressure ulcers.
  • Superficial wounds.
  • Postoperative wounds.
  • Skin tears.

Duoderm Wound Dressing Contraindications:

  • It should not be used on sensitive individuals who have had an allergic reaction to the dressing or its components.


What to buy with ConvaTec Hydrocolloid Dressing


How to use ConvaTec DuoDERM Dressing?

How to Apply Extra Thing Dressing?

  • Wash your hands, cleanse and rinse the wound and then dry the surrounding skin.
  • Hold the adhesive side of the dressing over the wound.
  • Align the dressing with the center of the wound.
  • Gently apply the center part of the dressing.
  • Remove the bottom white release paper while rolling the dressing in place but do not stretch it.
  • Repeat the above procedure on the other side and remove the clear release paper.
  • Gently mold the dressing into place for 30-60 seconds.

How to Remove DuoDERM Extra Thin Dressing?

  • Gently lift one corner of the DuoDERM thin dressing.
  • Roll it away from the wound while holding the skin away.
  • Gently lift the other corners and pull upwards until the dressing completely peels off.

When to change DuoDerm Extra Thin Hydrocolloid Dressing?

DuoDerm dressings can be worn continuously for up to seven days unless they are uncomfortable, there is a leakage or there are clinical signs of infection

Customer Reviews

Please enter your and your friends email address below.
Fields marked with * are compulsory

Submit Cancel
The selected product information has been successfully emailed to your friend.

Thank you for using