Smith & Nephew Replicare Thin Hydrocolloid Dressing

Smith & Nephew Replicare Thin Hydrocolloid Dressing

Brand/Manufacturer: SMITH & NEPHEW
Save UPTO
  • FSA Approved

Smith & Nephew Replicare Thin Hydrocolloid Dressing is made from a polyurethane film with a thin layer of absorbent colloid. The waterproof polyurethane film cover material allows dressing to be easily cleaned. Permits patient to bath or shower without the need for dressing change, it also aids in the prevention of bacterial contamination.

Item # Desc Pkg Price
59484000 2" x 2-3/4" 10/Pack
$44.05
$33.86
59484000 2" x 2-3/4" 10/Pack, 15Pk/Case
$612.85
$506.87
59484100 3-1/2" x 5-1/2" Each
$10.45
$7.52
59484100 3-1/2" x 5-1/2" 10/Pack
$80.45
$61.82
59484100 3-1/2" x 5-1/2" 10/Pack, 12Pk/Case
$806.95
$723.11
59484200 6" x 8" 5/Pack
$70.65
$54.29
59484200 6" x 8" 5/Pack, 10Pk/Case
$640.65
$529.88

Features

  • Smith & Nephew Replicare thin Hydrocolloid Dressing has no-touch application system which results in fewer wasted dressings
  • Combination of conformability, adhesions and absorption extends wear time and reduces risk of wound contamination
  • Goes on easy, comes off clean
  • Moist wound environment
  • Improves patient comfort
  • Superior conformability
  • Cost-effective choice

More Information

  • Benefits:
    Moist wound environment

    - It maintains a moist wound environment that assists in promoting autolytic debridement while managing low levels of exudate
    Goes on easy, comes off clean
    - The sterile, no-touch, self-adhering application system makes it simple to apply even while wearing gloves
    - High cohesive properties keep the dressing from falling apart and leaving residue in the wound
    Superior conformability
    - Stretches easily and returns to its original shape more completely even over joints
    - This suppleness and flexibility allows dressings to give without migrating, minimizing granulation tissue injury and damage to peri-wound skin integrity
    Improves patient comfort
    - Permits increased ease of patient mobility without uncomfortable pulling of the skin, especially over joints
    - The dressing thin profile also makes it cosmetically acceptable to patients
    Cost-effective choice
    - Promotes more cost-effective use of material and resources and nursing services
    - The dressing is totally transparent, so there is no need to disturb the dressing to check for saturation or healing progress
  • Indications:
    Indicated for exudate absorption and the management of partial to full thickness wounds
    Some typical wounds are:
    - Ulcers (venous, arterial, diabetic)
    - Pressure sores
    - Donor sites
    - Surgical incisions
    - Surgical excision
    - Burns (first and second degree)
    -Creation and maintenance of a moist wound environment
    - Moist wound environments have been established as optimal environments for the management of the wound
    - Provides physical separation between the wound and external environments to assist in preventing bacterial contamination of the wound
  • Precautions:
    Replicare Thin is not indicated for use on third degree burns
  • Instructions for use:
    - Cleanse the wound with saline solution or an appropriate wound cleanser
    - Cleanse and dry the peri-wound skin
    - If the peri-wound skin is particularly friable, it may be protected from trauma by applying Skin-Prep
    - Choose a dressing large enough to cover the wound with 1 of overlap on all sides of the wound
    - Remove the printed backing paper exposing the adhesive surface
    - Center the dressing over the wound and press the edges firmly to the surrounding skin
    - Remove small plastic application tab from underside of the dressing and press all the sides firmly to the skin

Customer Reviews

Please enter your and your friends email address below.
Fields marked with * are compulsory
 
*
*
*
*


Submit Cancel
The selected product information has been successfully emailed to your friend.

Thank you for using www.shopwoundcare.com

Close