ConvaTec DuoDERM Extra Thin Dressing - 4 x 4 inches - Square

ConvaTec DuoDERM Extra Thin Dressing - 4 x 4 inches - Square

Brand/Manufacturer: CONVATEC
  • FSA Approved
  • Latex Free
  • Made in USA

ConvaTec Duoderm Extra Thin Hydrocolloid Dressing is a hydrocolloid dressing indicated for the management of lightly exuding wounds. DuoDERM dressing combines a unique ConvaTec hydrocolloid formulation that distinguishes it from other hydrocolloid dressings and a vapor-permeable outer film to provide an occlusive moist environment.

Why Choose ConvaTec Duoderm Extra Thin Hydrocolloid Dressing

  • Aids autolytic debridement
  • Easy to apply and remove
  • Waterproof outer polyurethane film
  • Supports moist wound healing environment


Item # Desc Pkg Price
187955 4" x 4" Each
187955 4" x 4" 5/Pack
187955 4" x 4" 10/Pack
187955 4" x 4" 50/Case

ConvaTec Duoderm Extra Thin Hydrocolloid Dressing Features

  • Uses ConvaTec unique hydrocolloid formulation
  • Consists of a cross-linked honeycomb
  • Protects the wound and Aids autolytic debridement
  • Easy to mold and can be cut to shape to allow easy treatment of awkward areas
  • Provides a bacterial and viral barrier reducing the risk of infection when used within a protocol of care
  • Waterproof outer polyurethane film
  • Secures dressing in awkward areas to reduce the risk of rolling up
  • Offers continues care throughout the healing process
  • Thin polyurethane film provides a bacterial and viral barrier when the dressing remains intact and without leakage
  • Reduces the risk of further skin breakdown due to friction by preventing contact with clothes/bed linen
  • The dressing can be removed without damaging newly formed tissue
  • The film provides a waterproof barrier over the wound dressing

When to use DuoDerm Extra Thin Wound Dressing?

DuoDERM Extra Thin Hydrocolloid Dressing can be used for the management of the following conditions:

  • Skin at risk of further breakdown
  • Stage I and II pressure ulcers
  • Postoperative wounds
  • Superficial wounds
  • Dry to lightly exuding dermal ulcers or wounds
  • Newly-formed tissue
  • Skin tears


What to Buy with DuoDERM Extra Thin Dressing?

How to Use Extra Thin Dressing?

How to Apply DuoDERM Dressing?

  1. Wash your hands, cleanse and rinse the wound, and then dry the surrounding skin.
  2. Measure the wound to select the appropriate dressing size, allowing a 3.0cm (1-1/4 inch) overlap on the intact skin around the whole wound.
  3. Warm the DuoDERM dressing between your hands.
  4. Remove the top white release paper, being careful to minimize finger contact with the adhesive surface.
  5. Hold the adhesive side of the dressing over the wound.
  6. Align the dressing with the center of the wound.
  7. Gently apply the center part of the dressing.
  8. Remove the bottom white release paper while rolling the dressing in place, but do not stretch it.
  9. Repeat the above procedure on the other side and remove the clear-release paper.
  10. Gently mold the dressing into place for 30-60 seconds.

Removing DuoDERM Dressing

  1. Gently lift one corner of the DuoDERM thin dressing.
  2. Roll it away from the wound while holding the skin away.
  3. Gently lift the other corners and pull upwards until the dressing completely peels off.


  • Should not be used on individuals who are sensitive to or have had an allergic reaction to the dressing or its components.


Customer Reviews

Please enter your and your friends email address below.
Fields marked with * are compulsory

Submit Cancel
The selected product information has been successfully emailed to your friend.

Thank you for using