Innovative Therapies Negative Pressure Wound Therapy Canister with Gel

What to buy with NPWT Canister

• Cardinal Health Negative Pressure Wound Therapy Y-Connector
• Medline Skintegrity Wound Cleanser
• Latex-Free Vinyl Exam Gloves

Changing the canister

1. Clamp the tubing closed.
2. Turn the PRO/PRO to GO off by pressing the OFF Button.
3. Disconnect SpeedConnect tubing connector from top of canister by twisting off the tapered connector.
4. To remove the canister, press the Canister Release Button located above the canister and gently pull the bottom of canister down to remove from the PRO/PRO to GO.
5. Cap the canister and ask your healthcare professional how to properly dispose of a used canister.
6. To install a new canister, hold the new unused canister at the bottom and slide upwards into the holder.
7. Line up the two ports on the canister with the two ports on the PRO/PRO to GO. Press the canister up and into the PRO/PRO to GO until it clicks and locks into place.
8. Connect the distal end of the SpeedConnect tubing with the blue tapered connector to the patient port of the canister. Gently twist and push the connector on just enough to secure and seal it.
9. Reopen the tubing clamp by pushing down on the top of the clamp until it releases.
10. Turn the PRO/PRO to GO on by pressing the ON Button to resume negative pressure wound therapy.

Disconnecting from the NPWT Device

1. Clamp the tubing closed.
2. Turn the PRO/PRO to GO off by pressing the OFF Button.
3. Disconnect SpeedConnect™ tubing connector from top of canister by twisting the tapered connector off the canister.
4. If canister is full, change the canister.

Customer Reviews